Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Houston, TX
Gate access control in Houston usually means one of two things: a keypad that stopped accepting codes after a storm, or an intercom that works fine until the humidity climbs. We fix both, and we document everything we find. Houston’s mix of 1980s-2000s suburban automation and newer builds means most systems we open up are a hybrid of aging wire, newer boards, and corrosion from the Gulf air. Call (936) 297-5126 and a live person answers, day or night.
Why Houston Homes Are Different
Houston’s black gumbo clay is the first thing any gate technician here talks about. The soil swells when saturated by the city’s 50-plus inches of annual rainfall, then shrinks and cracks during dry stretches. That cycle exerts thousands of pounds of lateral pressure per post, so a gate that suddenly binds or won’t latch is rarely just a hardware problem. The post itself has to be checked for lean before any operator or hinge work gets quoted. In master-planned communities like Kingwood, Memorial, and Clear Lake, we regularly see ornate wrought iron driveway gates from the 1980s-2000s boom now failing at both the operator and the hardware simultaneously. Houston’s lack of traditional zoning means we service wooden privacy gates on Heights bungalows and heavy steel slide gates on commercial-adjacent properties in the same day. The humidity, routinely 75-90% RH, accelerates rust on iron and steel far faster than in drier Texas cities. And Hurricane Harvey in 2017 left a lasting awareness of operator waterproofing and mounting height in flood-prone neighborhoods like Meyerland and Cypress.
Our Main Houston Services
These are the two services Houston homeowners call about most, and the one that follows right after.
Gate Repair in Houston
When a Houston gate sags, drags, or won’t close, the cause is usually post lean from clay soil movement, not the hinge itself. We check the post first, then the hinges, then the operator. If you have a broken spring, bent rail, or a gate that scrapes the driveway, full details are on our Gate Repair in Houston page.
Gate Installation in Houston
New gate installation in Houston has to account for soil movement and drainage from the start. We size footings for the clay, set posts plumb, and leave a written record of every measurement. For wrought iron driveway gates, wooden privacy gates, or steel slide gates, see Gate Installation in Houston.
Gate Motor & Opener in Houston
Houston operators fail from moisture, salt air, and power surges. We service LiftMaster, FAAC, BFT, and six other major brands without steering you toward a replacement you don’t need. Motor diagnosis, board replacement, and limit switch adjustment are all covered on our Gate Motor & Opener in Houston page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Houston
Gate access control in Houston deals with the systems that decide who gets in: keypads, remotes, phone entry, card readers, and video intercoms. The constant humidity corrodes keypad contacts and board connections faster than most manuals anticipate, and the 2017 Harvey flooding left a lot of operators and access boards mounted too low to survive the next event. We work on Gate Access Control for residential and light commercial properties across Houston, and every visit leaves a written record of what was found and what was changed.
Keypad Entry
Signs you need it
Buttons that need a hard press, codes that work intermittently, or a keypad that goes dead after rain all point to failed contacts or water ingress.
What it costs in Houston
Keypad replacement in Houston typically runs $95-$245 for parts, with labor adding $75-$110 depending on whether existing wiring can be reused.
How we do it
We test voltage at the keypad, check the wiring run for corrosion, replace the unit, reprogram codes, and photograph the new install.
Remote Control
Signs you need it
Remotes that only work within ten feet, won’t pair, or drain batteries in a month usually mean a failing receiver board or antenna corrosion.
What it costs in Houston
Receiver replacement or remote reprogramming in Houston typically costs $150-$300 total, depending on brand and whether the antenna needs replacing.
How we do it
We read the receiver’s output with a meter, test antenna continuity, pair new remotes, and log the frequencies in the written job record.
What Gate Access Control Costs in Houston
| Item | Typical range in Houston |
|---|---|
| Keypad replacement | $170-$355 installed |
| Receiver or remote reprogramming | $150-$300 |
| Service call diagnosis | $75-$110 |
Can you fix a Houston gate access system the same day?
Most keypad and remote failures we fix in one visit, usually the same day. The written price is agreed before we open the panel. Call (936) 297-5126.
Do you work on existing access control, or only install new systems?
We repair existing systems first. Nine major brands, including LiftMaster and FAAC, are familiar to us. Replacement is only recommended when the board is beyond repair. Call (936) 297-5126 for a straight answer.
Gate Parts & Welding in Houston
Gate parts and welding in Houston means hinge replacement, post replacement, rail repair, custom welding, and gate rollers. The salt-laden Gulf air and near-constant humidity push iron and steel gates toward rust failure on a 3-5 year cycle unless they’re refinished proactively. In neighborhoods built over the gumbo clay, a post that has leaned 2-4 inches over a decade will throw off every other component attached to it. Our Gate Parts & Welding work starts with post inspection, because a new hinge on a leaning post is money wasted.
Hinge Replacement
Signs you need it
A gate that sags toward the latch side, scrapes the ground, or shows rust staining at the hinge barrel is telling you the hinge has worn or seized.
What it costs in Houston
Hinge replacement on a Houston driveway gate typically runs $180-$420 per hinge, installed, depending on gate weight and post condition.
How we do it
We lift the gate with a jack, cut or unbolt the old hinge, check the post for lean, weld or bolt the new hinge, and photograph the finished work.
Post Replacement
Signs you need it
A post leaning more than 2 degrees out of plumb, with cracking concrete at the base, has moved beyond shimming and needs to be reset or replaced.
What it costs in Houston
Post replacement in Houston clay soil typically costs $400-$900 per post, including concrete removal, new footing, setting, and welding brackets.
How we do it
We dig out the old footing, pour a deeper base with drainage gravel, set the post plumb, and record the measurements before the concrete sets.
What Gate Parts & Welding Costs in Houston
| Item | Typical range in Houston |
|---|---|
| Hinge replacement | $180-$420 per hinge |
| Post replacement | $400-$900 per post |
| Custom welding repair | $120-$350 |
Can you weld a broken gate on site in Houston?
Yes, we carry mobile welding equipment and can repair cracks, broken pickets, and failed bracket welds on site. The price is written down before the welder starts. Call (936) 297-5126.
Do you replace posts that have shifted in Houston’s clay soil?
We do, and we set the new footing for drainage and depth so the clay cycle doesn’t repeat as quickly. The old post lean gets measured and photographed first. Call (936) 297-5126 for pricing.
Brands We Service in Houston
We repair and service LiftMaster, FAAC, BFT, and Mighty Mule equipment, along with five other major automation brands. Common boards and parts are stocked locally for faster turnaround. See our brands for the full list.
Pricing for Gate Repair in Houston, TX
| Service | Typical range in Houston |
|---|---|
| Gate repair service call | $75-$110 |
| Keypad replacement | $170-$355 installed |
| Receiver or remote reprogramming | $150-$300 |
| Hinge replacement | $180-$420 per hinge |
| Post replacement | $400-$900 per post |
| Custom welding repair | $120-$350 |
| Gate motor repair | $225-$495 |
| Gate motor replacement | $650-$1,500 |
| Full gate installation | $2,500-$9,500 |
Houston pricing gets pushed higher by clay-soil post work, rust remediation, and access systems that were mounted too low and took on water. Whatever the number, we hand you the written price before any work starts, under Haven Standard Clause 1, and the price on paper is the price you pay.
Neighborhoods We Serve in Houston
We dispatch across Houston, from the Heights and Memorial to Kingwood, Clear Lake, the Energy Corridor, and Cypress. Response time for most repair calls runs same day or next morning, depending on the season.
- Memorial
- Kingwood
- Clear Lake
- The Heights
- Energy Corridor
Service Area - Cities Near Houston
We also serve homeowners directly north and northeast of Houston. For gate work in Humble, TX, Spring, TX, Tomball, TX, or Pinehurst, TX, the same written-price standard and documented photo record apply on every visit.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Houston
Most repair calls in Houston are dispatched same day or next morning. A live person answers (936) 297-5126 24/7 and schedules while you’re on the phone. You’ll get a technician name and photo before arrival.
Many Houston master-planned communities, including Kingwood and Clear Lake, require architectural committee approval for gate replacement or visible hardware changes. We provide the written scope and material specs your HOA needs, at no charge.
Yes. Under Haven Standard Clause 1, the written price is handed to you before work starts, and it does not change unless you add work you asked for. The price is agreed before we pick up a tool.
If your Houston gate is sagging, binding, or the access system won’t respond, call (936) 297-5126. We’ll name the problem, name the price, and leave you the documentation.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Houston Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A.