Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Pinehurst, TX
Gate access control in Pinehurst usually means one of two things: a keypad or card reader that stopped talking to the motor, or a homeowner who wants controlled entry on a long caliche driveway where the gate sits too far from the house to hear a visitor arrive. Most Pinehurst homes sit on 1 to 5 acre parcels with perimeter driveway gates, so access control here gets exposed to more weather, more dust, and more direct sun than the courtyard gates common in denser subdivisions to the south. Call (936) 297-5126 and a live person answers, any hour.
Why Pinehurst Homes Are Different
Pinehurst sits in Montgomery County’s semi-rural fringe, where 1 to 5 acre residential parcels are the norm and electric slide or swing gates guard long gravel and caliche driveways. The housing stock is mostly ranch-style homes and newer construction from the 1980s through the 2000s, which means the dominant gate type is the perimeter driveway gate, usually ornamental iron swing or tubular steel slide. That profile matters because these gates run hundreds of cycles in all weather and sit far from the house, where a fault can go unnoticed for days.
Montgomery County’s shrink-swell clay is the biggest recurring factor. During wet seasons the soil expands and in summer droughts it pulls away, so gate posts heave, lean, and lose plumb. That throws off limit switches and photo-eye alignment, which means access control problems here often trace back to a post that moved, not a keypad that failed. Roughly 50 inches of annual rain accelerates surface rust on iron and pushes debris into slide tracks, and after heavy storms we routinely find small rocks and mud packed into the bottom track on gravel driveways across Pinehurst.
Our Main Pinehurst Services
Pinehurst homeowners call most often about two problems: a gate that won’t open or close reliably, and a motor that has quit entirely. Here’s what each job involves locally.
Gate Repair in Pinehurst
Repair work in Pinehurst usually starts with a leaning post or a misaligned track rather than a broken motor. The clay soil shifts, the gate binds, and the operator burns out trying to move a gate that no longer travels true. We measure the post, check limit switches, reset travel, and document every adjustment with photos. Read more about Gate Repair in Pinehurst.
Gate Installation in Pinehurst
New gates on Pinehurst acreage lots need deeper post footings than in subdivision neighborhoods, because the shrink-swell clay will move anything set shallow. We quote the full job in writing, including concrete depth and gate weight, before any work starts. See Gate Installation in Pinehurst for the full scope.
Gate Motor & Opener in Pinehurst
When an operator fails on a Pinehurst driveway gate, we identify the brand already on the property and repair it rather than steering you toward a replacement. We service LiftMaster, FAAC, BFT, Mighty Mule, and five other major automation brands, which means the motor you have is usually the motor we fix. Details at Gate Motor & Opener in Pinehurst.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Pinehurst
Gate access control in Pinehurst typically involves a keypad, card reader, or phone entry unit mounted at the driveway entrance, wired back to the gate operator that sits anywhere from 80 to 400 feet away. The distance and the clay soil matter here: when a post shifts even a degree, the access control wiring can pull loose or the reader mounting plate can twist, and the system stops recognizing valid codes. We service the hardware, the wiring, and the operator interface, and we document the whole job under Gate Access Control standards.
Keypad Entry
Signs you need it
Keys work for some people and not for others, or codes that worked last week suddenly stop opening the gate after a rain.
What it costs in Pinehurst
Keypad replacement in Pinehurst typically runs $180 to $400 depending on whether the existing wiring can be reused or needs a new pull.
How we do it
We test voltage at the keypad, check the wire run for breaks or corrosion, replace or reprogram the unit, and photograph the final wiring before we leave.
Phone Entry
Signs you need it
Delivery drivers can’t reach anyone at the house, or the gate sits too far from the door for a visitor to be heard.
What it costs in Pinehurst
Phone entry systems in Pinehurst typically run $250 to $700 installed, depending on whether a cellular unit or a landline connection is used.
How we do it
We mount the unit at the driveway, tie it into the operator’s control board, program the forwarding number, and test the call from outside the gate.
What Gate Access Control Costs in Pinehurst
| Item | Typical range in Pinehurst |
|---|---|
| Keypad replacement | $180 - $400 |
| Phone entry system | $250 - $700 |
| Access control wiring repair | $90 - $250 |
Can you fix a keypad that works intermittently after rain?
Usually yes. The most common cause is water intrusion at the keypad housing or a corroded splice in the wire run to the operator. We dry, seal, and re-splice, then photograph the repair for your record.
Do you install access control on existing gates?
Yes. Most Pinehurst access control jobs are retrofits on gates that have been in place for years. We match the new hardware to whatever operator is already on the property, whether it’s FAAC, LiftMaster, or another brand.
Gate Parts & Welding in Pinehurst
Gate parts and welding in Pinehurst often means fixing what the clay soil and the humid air have done to a steel gate over five or ten years: rusted hinges, a bowed rail, or a post that has leaned far enough to bind the gate. Because most Pinehurst gates are ornamental iron or tubular steel on long driveway runs, the repairs are structural, not cosmetic, and they need to hold through the next wet season. Our Gate Parts & Welding service covers the full repair, from the first weld to the final paint match.
Hinge Replacement
Signs you need it
The gate sags toward the latch side, drags on the ground, or shows rust blooms around the hinge barrels.
What it costs in Pinehurst
Hinge replacement in Pinehurst typically runs $120 to $400 per hinge depending on gate weight and whether the post is still sound.
How we do it
We support the gate, cut out the old hinge, weld in a new one sized to the gate weight, and photograph the finished weld before painting.
Post Replacement
Signs you need it
The post leans visibly, the gate scrapes at the latch, or the operator trips its limit switch repeatedly no matter how many times it’s reset.
What it costs in Pinehurst
Gate post replacement in Pinehurst typically runs $350 to $900 per post, including concrete and re-setting the gate to plumb.
How we do it
We dig out the old footing, set a new post below the clay’s active zone, brace it plumb, and re-hang the gate before the concrete cures.
What Gate Parts & Welding Costs in Pinehurst
| Item | Typical range in Pinehurst |
|---|---|
| Hinge replacement | $120 - $400 per hinge |
| Post replacement | $350 - $900 per post |
| Custom welding repair | $150 - $600 per job |
Can you weld a gate that’s rusted through at the bottom rail?
In most cases, yes. We cut back to clean steel, weld in a reinforcing section matched to the original profile, and prime and paint the repair. The gate stays on its hinges during the work.
Do you repair or replace bent gate frames?
We repair when the frame steel is still sound, typically by straightening and reinforcing the bent section. If the tubing is crushed or rusted thin, replacement of that section costs less than replacing the whole gate.
Brands We Service in Pinehurst
We work on LiftMaster, FAAC, BFT, and Mighty Mule operators in Pinehurst, plus five other major automation brands. Common control boards and receiver parts are stocked for same-week service, and specialty parts ship fast. See our brands for the full list.
Pricing for Gate Repair in Pinehurst, TX
| Service | Typical range in Pinehurst |
|---|---|
| Gate realignment after soil movement | $150 - $350 |
| Limit switch adjustment | $90 - $175 |
| Photo-eye realignment | $75 - $150 |
| Track clearing and roller cleanup | $80 - $180 |
| Keypad replacement | $180 - $400 |
| Phone entry system | $250 - $700 |
| Hinge replacement | $120 - $400 per hinge |
| Post replacement | $350 - $900 per post |
| Custom welding repair | $150 - $600 per job |
In Pinehurst, the biggest price movers are post condition and wire run length. A gate that needs a new post and a new wire pull costs more than a simple limit switch reset, and the written quote you get before work starts reflects exactly what we found on site.
Neighborhoods We Serve in Pinehurst
We cover Pinehurst and the surrounding acreage-lot neighborhoods throughout the west side of Montgomery County. Typical response time for gate repair calls in the Pinehurst area is same-day or next-morning depending on the time of the call.
- Pinehurst city limits
- Lake Creek corridor
- Shenandoah Valley Drive area
- Timber Lane and surrounding streets
- Pinehurst Estates
Service Area - Cities Near Pinehurst
We handle gate repair calls across the Montgomery County side of greater Houston. Beyond Pinehurst, our technicians regularly work in Tomball, TX, Conroe, TX, Prairie View, TX, and Spring, TX.
Serving Pinehurst, TX - Our Local Coverage Area
We’re based in the Pinehurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pinehurst
Most Pinehurst calls get a same-day or next-morning arrival, depending on when you call and where the gate sits. A live person answers the phone 24/7, so you’ll know your window before you hang up. Call (936) 297-5126.
Some Pinehurst neighborhoods have deed restrictions covering gate height, style, and setback, and Montgomery County permit rules may apply to new gate installations. We check the local requirements on every install and quote accordingly, so nothing stalls mid-job.
Yes, and those are common in Pinehurst. Gravel and caliche hold moisture against the gate posts and feed debris into slide tracks, so we carry track-clearing tools and build our post footings for the local soil rather than a generic standard.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pinehurst Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.